重口老太大和小伙乱,人妻去按摩店被黑人按中出 ,亚洲中文字幕无码专区,久久精品国产精品亚洲

The laser marking machine industry has been quietly developing for more than 50 years. From the initial unfamiliarity and ignorance of the public, to the gradual replacement of traditional processes, it has achieved rapid development. So, do you know which parts are made of laser marking machine? The following automated laser equipment manufacturer-Foshan Fulan Laser Technology Co., Ltd. will introduce you to the components of the laser marking machine:

1. Laser power supply

 The laser power supply is a device that provides power to the laser, and its input voltage is AC220V alternating current. Installed in the control box of the marking machine.

Second, the laser

 This is the core accessory and is installed in the casing of the marking machine. At present, there are mainly 6 kinds of lasers: optical fiber, ultraviolet, carbon dioxide, green light, MOPA, semiconductor, also known as 6 series.

3. Marking control software

 The marking software is used to control the marking parameters, control the debugging application interface, and operate all the actions of marking.

4. Galvanometer field lens scanning system

 The galvanometer scanning system is composed of optical scanner and servo control. The vibration lens consists of three parts: stator, rotor and detection sensor. The optical scanner uses a servo motor with a moving magnetic deflection working method. The optical scanner is divided into an X-direction scanning system and a Y-direction scanning system, and a laser reflecting lens is fixed on each servo motor axis. Each servo motor sends out digital signals from the computer to control its scanning trajectory.

5. Focusing system

 The function of the focusing system is to focus the parallel laser beam at one point. The f-θ lens is mainly used. Different f-θ lenses have different focal lengths, and the marking effect and range are also different. Users can choose the type of lens according to their needs.

6. Industrial Control Computer

 The industrial control computer is the center of the entire laser marking machine control and command, and also the carrier of software installation. Through the coordinated control of the acousto-optic modulation system and the galvanometer scanning system, the workpiece marking process is completed.

The computer control system of the laser marking machine mainly includes a chassis, a motherboard, a CPU, a hard disk, a memory module, a D/A card, a floppy drive, a display, a keyboard, a mouse, etc.

 The model structure of the entire device.

  The above is the basic structure of Foshan Fulan Laser Editor based on the composition structure of the company's series of standard model laser marking machines, roughly integrated (Note: specific, depending on the model, different models, Components will vary).